LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (General (Electrical)) >> How To Diagnose >> General Electrical System Check >> Continuity Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Continuity Check

WARNING: This page is about a different car, the 2004 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
  1. When the switch is in the "OFF" position and the contact points of terminals 1 and 2 are connected, the self power test light should illuminate or the ohmmeter should read 0 ohm.
  2. When the switch is the "ON" position and the contact points of terminals 3 and 4 are connected, the self power test light should come on or the ohmmeter should read 0 ohm.
    Fig 1: Checking Continuity
    G03507418Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals