LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer ES, Standard >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2001 Montero >> Pattern 10 >> Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the vehicle for 4 minutes at the following conditions. (During the monitor)
    • Engine speed: More than 1,200 r/min
    • Engine load: More than 25%
    • Airflow rate: More than 113 Hz
  3. Release the accelerator pedal for 5 seconds. (During the monitor)
  4. Stop the safe place and turn the ignition switch to "LOCK" (OFF) position.

Start the engine and do Steps 1 to 4 again. Confirm that the diagnostic trouble code (DTC) is not output.