Fastener Tightening Specifications
Fastener Tightening Specifications
| ITEMS | SPECIFICATIONS | |
|---|---|---|
| A/T fluid cooler | ||
| A/T fluid cooler | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Cooler bracket | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Key interlock and shift lock mechanisms | ||
| Shift lock cable unit fixing bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Transaxle assembly | ||
| Bell housing cover | 9.0 ± 1.0 N.m (80 ± 9 in-lb) | |
| Drive plate bolt | 50 ± 4 N.m (37 ± 3 ft-lb) | |
| Park/neutral position switch mounting bolt | 11 ± 1 N.m (96 ± 8 in-lb) | |
| Starter motor connecting bolt | 30 ± 3 N.m (23 ± 2 ft-lb) | |
| Transaxle assembly lower part coupling bolt | 50 ± 4 N.m (37 ± 3 ft-lb) | |
| Transaxle assembly upper part coupling bolt | 50 ± 4 N.m (37 ± 3 ft-lb) | |
| Transaxle control cable connection | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Transaxle mount bracket | 47 ± 7 N.m (35 ± 5 ft-lb) | |
| Transaxle mount stopper | 82 ± 7 N.m (61 ± 5 ft-lb) | |
| Transaxle stay | To engine | 22 ± 4 N.m (16 ± 3 ft-lb) |
| To transaxle | 44 ± 10 N.m (33 ± 7 ft-lb) | |
| Transaxle control | ||
| Cable arm | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Detente spring | 1.8 ± 0.2 N.m (16 ± 2 in-lb) | |
| Indicator panel assembly | 1.5 ± 0.5 N.m (14 ± 4 in-lb) | |
| Lever assembly | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Nut | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Shift lock cable unit fixing bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Shift knob | 1.8 ± 0.2 N.m (16 ± 2 in-lb) | |
| Shift switch | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Select lever | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Selector lever assembly | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Transaxle control cable assembly | 12 ± 2 N.m (102 ± 22 in-lb) | |
| Transfer assembly | ||
| Air guide connecting bolt | 9.0 ± 2.0 N.m (80 ± 17 in-lb) | |
| Air guide connecting nut | 5.0 ± 1.0 N.m (44 ± 9 in-lb) | |
| Rear roll stopper connecting nut | 52 ± 7 N.m (39 ± 5 ft-lb) | |
| Transfer connecting bolt | 69 ± 9 N.m (51 ± 7 ft-lb) | |