October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Component Testing: Brush
- Replace the brush is the brush protrusion length is below 0.08" (2 mm). See Fig 1
.
- The brush can be removed by unsoldering the brush lead wire. See Fig 2
.
- When installing a new brush, push the brush in to the brush holder, and solder the lead wire.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.