DTC Set Conditions
If the resistance value for the underdrive solenoid valve circuit is greater than 3.5 ohm (open) or less than 2.6 y (short) for 4 seconds, DTC 32 is set. The transaxle is locked into 3rd gear as a fail-safe measure.
If the resistance value for the underdrive solenoid valve circuit is greater than 3.5 ohm (open) or less than 2.6 y (short) for 4 seconds, DTC 32 is set. The transaxle is locked into 3rd gear as a fail-safe measure.