LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer LS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems - Except Evolution >> Diagnosis >> Inspection Using Scan Tool MB991502
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Using Scan Tool MB991502

CAUTION: To prevent damage to scan tool MB991502, always turn the ignition switch to the LOCK (OFF) position before connecting or disconnecting scan tool MB991502.
  1. Connect scan tool MB991502 to the data link connector.
  2. Turn the ignition switch to the ON position.
  3. Carry out inspection by means of the data list. If there is an abnormality, check and repair the chassis harness and components. See SYMPTOM LIST  under SYMPTOM PROCEDURES.
  4. Re-check using scan tool MB991502 and check to be sure that the abnormal input and output have returned to normal because of the repairs.
  5. Erase the Diagnostic Trouble Codes (DTC's).
  6. Turn the ignition switch to the LOCK (OFF) position.
  7. Disconnect scan tool MB991502 from the data link connector.
  8. Start the engine again and do a test drive to confirm that the problem is eliminated.
scientia non olet · About LEMON Manuals