LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Automatic Air Conditioner) >> Intake Sensor >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the evaporator. Refer to "REMOVAL AND INSTALLATION FOR EVAPORATOR "
  2. Remove the intake sensor clip and then the sensor.
    CAUTION: Be careful not to damage the core surface.
    Fig 1: Identifying Intake Sensor Clip, Intake Sensor And Evaporator Core
    G02162537Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals