October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Component Testing: Brush
- Measure the length of the protrusion of the brush. Replace the brush if the protrusion length is shorter than the limit of 2 mm. See Fig 1
.
- Unsolder the lead of the brush. The brush will come out, ready for removal.
- Install a new brush by pushing it into the holder. See Fig 2
.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.