October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Intermittent Simulation
To reproduce the conditions creating an intermittent fault, use the following methods:
- Lightly vibrate or tap component.
- Heat component.
- Wiggle or bend wiring harness, shake, wiggle harness connector.
- Spray component with water.
- Remove/apply vacuum source.
Monitor circuit/component voltage or resistance while simulating intermittent. If engine is running, monitor for DTCs. Use test results to identify a faulty component or circuit.