Multiplex Control Systems
- Description
- Operation
- Tone Alarm Function
- Central Door Locking System
- Power Window Relay Control
- Keyless Entry System
- Sunroof
- Windshield Wipers And Washers
- Rear Wiper And Washer
- Seat Belt Warning Light
- Headlight
- Flasher Timer
- Fog Light
- Dome Light
- Interior Light Automatic Shutdown Function
- Door-Ajar Indicator Light
- Theft-Alarm System
- Configuration Function
- Adjustment Procedures Of SWS Function
- Self-Diagnostic System
- System Tests
- Notes
- Inspection Procedure A-1: Communication With The SWS Monitor Kit Is Impossible
- Inspection Procedure A-2: Communication With The Column Switch (Column-Ecu) Is Impossible
- Inspection Procedure A-3: Communication With The ETACS-Ecu Is Impossible
- Inspection Procedure A-4: Communication With The Front-Ecu Is Impossible
- Inspection Procedure A-5: Communication With The Sunroof Motor Assembly (Sunroof-Ecu) Is Impossible
- Inspection Procedure B-1: Tone Alarm: Ignition Key Reminder Tone Alarm Function Does Not Work Normally
- Inspection Procedure B-2: Tone Alarm: Light Reminder Tone Alarm Function Does Not Work Normally
- Inspection Procedure B-3: Tone Alarm: Seat Belt Tone Alarm Function Does Not Work Normally
- Inspection Procedure C-1: Central Door Locking System: The Central Door Lock System Does Not Work At All
- Inspection Procedure C-2: Central Door Locking System: Some Doors Do Not Lock Or Unlock
- Inspection Procedure C-3: Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Door Lock Switch Operation
- Inspection Procedure C-4: Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Door Lock Key Cylinder Key Operation
- Inspection Procedure C-5: Central Door Locking System: All The Doors Do Not Lock With Just The Driver's Or Front Passenger's Inside Lock Knob Operation
- Inspection Procedure C-6: Central Door Locking System: Forgotten Key Prevention Function Does Not Work Normally
- Inspection Procedure D-1: Power Window: Power Windows Do Not Work At All
- Inspection Procedure D-2: Power Window: The Power Window Timer Does Not Work Normally
- Inspection Procedure D-3: Power Window: Only Door Window (LH) Does Not Work By Operating Power Window Main Switch
- Inspection Procedure D-4: Power Window: Only Power Window (RH) Does Not Work By Operating Power Window Sub-Switch
- Inspection Procedure D-5: Power Window: Door Window (RH) Does Not Work By Operating Power Window Main Switch
- Inspection Procedure E-1: Keyless Entry System: Keyless Entry System Does Not Operate
- Inspection Procedure E-2: Keyless Entry System: The Dome Light, The Turn-Signal Lights And The Horn Do Not Operate Through The ANSWERBACK Function
- Inspection Procedure E-3: Keyless Entry System: Encrypted Code Cannot Be Registered
- Inspection Procedure F-1: Sunroof: Sunroof Does Not Operate
- Inspection Procedure F-2: Sunroof: Any Of The Sunroof Switch Positions Is Defective
- Inspection Procedure F-3: Sunroof: Sunroof Timer Function Does Not Work Normally
- Inspection Procedure F-4: Sunroof: Safety Mechanism Does Not Function
- Inspection Procedure G-1: Windshield Wiper And Washer: Windshield Wiper Does No Not Work At All
- Inspection Procedure G-2: Windshield Wiper And Washer: The Windshield Wipers Do Not Work When The Windshield Wiper Switch Is At "Int" Or "Mist" Position Or The Windshield Washer Switch Is At "On" Position. However, The Wipers Work At Low Speed When The Windshield Wiper Switch Is At "Lo" Or "Hi"
- Inspection Procedure G-3: Windshield Wiper And Washer: Any Of The Windshield Wiper Switch Positions Is Defective
- Inspection Procedure G-4: Windshield Wiper And Washer: Windshield Wiper Does Not Stop At The Predetermined Park Position
- Inspection Procedure G-5: Windshield Wiper And Washer: Windshield Intermittent Wiper Interval Can Not Be Adjusted By Means Of Windshield Intermittent Wiper Interval Adjusting Knob
- Inspection Procedure G-6: Windshield Wiper And Washer: The Windshield Intermittent Wiper Interval Is Not Changed According To The Vehicle Speed
- Inspection Procedure G-7: Windshield Wiper And Washer: Windshield Washer Does Not Work
- Inspection Procedure H-1: Rear Wiper And Washer: Rear Wiper Does No Not Work At All
- Inspection Procedure H-2: Rear Wiper And Washer: Rear Wiper Does Not Stop At The Predetermined Park Position
- Inspection Procedure H-3: Rear Wiper And Washer: When The Selector Lever Is Moved To "R" Position During The Rear Wiper Operation, The Rear Wiper Does Not Operate At The Continuous Mode
- Inspection Procedure H-4: Rear Wiper And Washer: Rear Washer Does Not Operate
- Inspection Procedure I-1: Seat Belt Warning Light: Seat Belt Warning Light Does Not Work Normally
- Inspection Procedure J-1: Headlight, Tail Light : Tail Lights Does Not Illuminate Normally
- Inspection Procedure J-2: Headlight, Tail Light: Headlights (Low-Beam) Do Not Illuminate Normally
- Inspection Procedure J-3: Headlight, Tail Light: Headlights (High-Beam) Do Not Illuminate Normally
- Inspection Procedure J-4: Headlight, Tail Light: When The Passing Switch Is Turned "On", The Headlights (Low-Beam Or High-Beam) Do Not Illuminate
- Inspection Procedure J-5: Headlight, Tail Light: Headlights Do Not Illuminate When The Lighting Switch Is At "Auto," "Tail," And "Passing" Position, But Illuminate At Low-Beam When The Switch Is At "Head" Position. At This Position, The Headlights Cannot Be Changed Into High Beam By Operating The Dimmer Switch
- Inspection Procedure J-6: Headlight, Tail Light: Tail Lights, The Position Lights, The Side Marker Light Or The License Plate Lights Do Not Illuminate
- Inspection Procedure J-7: One Of The Headlights Does Not Illuminate
- Inspection Procedure J-8: The High-Beam Indicator Light Does Not Illuminate
- Inspection Procedure J-9: Headlight, Tail Light: Headlight Automatic Shutdown Function Does Not Work Normally
- Inspection Procedure J-10: Headlight, Tail Light: Headlight Dimmer Switch Automatic Resetting Function Does Not Work Normally
- Inspection Procedure K-1: Flasher Timer: Turn-Signal Lights Does Not Flash When The Turn Signal Light Switch Is Turned On
- Inspection Procedure K-2: Flasher Timer: Hazard Warning Lights Do Not Illuminate
- Inspection Procedure K-3: Flasher Timer: The Right Or Left Turn-Signal Light Does Not Illuminate
- Inspection Procedure L-1: Fog Light: Fog Lights Do Not Illuminate When The Fog Light Switch Is Turned On
- Inspection Procedure L-2: Fog Light: Fog Lights Do Not Go Out When The Headlights (Low-Beam) Are Turned Off While The Fog Lights Are On
- Inspection Procedure L-3: Fog Light: One Of The Fog Lights Does Not Illuminate
- Inspection Procedure M-1: Interior Light: Dome Light, Luggage Compartment Light, Trunk Light And Door-Ajar Indicator Light Does Not Illuminate Or Turn Off Normally
- Inspection Procedure M-2: Interior Light: The Dome Light, Luggage Compartment Light Or Trunk Light Does Not Illuminate Or Go Out Normally
- Inspection Procedure M-3: Dome Light: Dome Light Dimming Function Does Not Work Normally
- Inspection Procedure M-4: Interior Light: The Interior Light Automatic Shut-Down Function Does Not Operate Correctly
- Inspection Procedure N-1: Theft Alarm System Is Not Armed (Indicator Light Does Not Illuminate)
- Inspection Procedure N-2: Horn Does Not Sound When Theft-Alarm Is Triggered
- Inspection Procedure N-3: Headlights (High-Beam) Do Not Flash When Theft-Alarm System Is Triggered
- Inspection Procedure N-4: Panic Alarm Function Does Not Work
- Inspection Procedure O-1: The ETACS-Ecu Does Not Receive Any Signal From The Ignition Switch (Acc)
- Inspection Procedure O-2: The ETACS-Ecu Does Not Receive Any Signal From The Ignition Switch (IG1)
- Inspection Procedure O-3: The ETACS-Ecu Does Not Receive Any Signal From The Fog Light Switch
- Inspection Procedure O-4: ETACS-Ecu Does Not Receive "R" Position Signal From The Backup Light Switch (M/T)
- Inspection Procedure O-5: ETACS-Ecu Does Not Receive "R" Position Signal From The Park/ Neutral Position Switch (A/T)
- Inspection Procedure O-6: The ETACS-Ecu Does Not Receive Any Signal From The Driver's Or The Front Passenger's Door Switch
- Inspection Procedure O-7: Column Switch: ETACS-Ecu Does Not Receive Any Signal From The Taillight Switch, The Headlight Switch, The Passing Light Switch, The Dimmer Switch, The Turn-Signal Light Switch Or Switch
- Inspection Procedure O-8: Column Switch: ETACS-Ecu Does Not Receive Any Signal From Windshield Mist Wiper Switch, Windshield Intermittent Wiper Switch, Windshield Low-Speed Wiper Switch, Windshield High-Speed Wiper Switch Or Windshield Washer Switch
- Inspection Procedure O-9: Column Switch: ETACS-Ecu Does Not Receive Any Signal From The Windshield Intermittent Wiper Interval Adjusting Knob
- Inspection Procedure O-10: Sunroof Switch: The ETACS-Ecu Does Not Receive Any Signal From The Up, Open Or Close/Down Switch
- Inspection Procedure P-1: ETACS-Ecu Does Not Receive A Signal From Key Reminder Switch
- Inspection Procedure P-2: The ETACS-Ecu Does Not Receive Any Signal From The Hazard Warning Light Switch
- Inspection Procedure P-3: The ETACS-Ecu Does Not Receive Any Signal From The Driver's Seat Belt Switch
- Inspection Procedure P-4: The ETACS-Ecu Does Not Receive Any Signal From The Driver's Or Front Passenger's Door Lock Key Cylinder Switch
- Inspection Procedure P-5: The ETACS-Ecu Does Not Receive Any Signal From The Driver's Or Passenger's Door Lock Actuator Switch
- Inspection Procedure P-6: The ETACS-Ecu Does Not Receive Any Signal From The Door Lock Switch (Incorporated In Power Window Main Switch And Power Window Sub Switch)
- Inspection Procedure P-7: ETACS-Ecu Does Not Receive An Auto-Stop Signal From The Rear Wiper Motor
- Inspection Procedure P-8: ETACS-Ecu Does Not Receive Any Signal From Hood Switch
- Inspection Procedure P-9: Liftgate Latch Switch Or The Trunk Lid Latch Switch Signal Is Not Sent To The ETACS-Ecu
- Inspection Procedure P-10: The Liftgate Lock Key Cylinder Switch Or The Trunk Lid Lock Key Cylinder Switch Lock Key Cylinder Switch Signal Is Not Sent To The ETACS-Ecu
- Inspection Procedure P-11: ETACS-Ecu Does Not Receive A Signal From The Vehicle Speed Sensor (M/T)
- Inspection Procedure P-12: ETACS-Ecu Does Not Receive Vehicle Speed Signal (A/T)
- Inspection Procedure P-13: Transmitter: ETACS-Ecu Does Not Receive Any Signal From Lock, Unlock, Panic Or Trunk Switch
- Inspection Procedure P-14: ETACS-Ecu Does Not Receive A Interior Light Loaded Signal
- Pin Voltage Charts
- Wiring Diagrams