Fastener Tightening Specifications

ITEM		SPECIFICATION
Transaxle	Control cable bracket	23 ± 3 N.m (17 ± 2 ft-lb)
	Eye bolt	30 ± 3 N.m (22 ± 2 ft-lb)
	Fluid temperature sensor	11 ± 1 N.m (95 ± 9 in-lb)
	Input shaft speed sensor	11 ± 1 N.m (95 ± 9 in-lb)
	Manual control lever	22 ± 3 N.m (16 ± 2 ft-lb)
	Manual control shaft detent	6 ± 1 N.m (52 ± 9 in-lb)
	Oil filter	12 ± 1 N.m (104 ± 9 in-lb)
	Oil pump	23 ± 3 N.m (17 ± 2 ft-lb)
	Output shaft bearing retainer <F4A42>	23 ± 3 N.m (17 ± 2 ft-lb)
	Output shaft bearing retainer<F4A51>	54 ± 5 N.m (40 ± 4 ft-lb)
	Output shaft jam nut	167 ± 10 N.m (123 ± 7 ft-lb)
	Output shaft speed sensor	11 ± 1 N.m (95 ± 9 in-lb)
	Park/neutral position switch (PNP switch)	11 ± 1 N.m (95 ± 9 in-lb)
	Rear cover	23 ± 3 N.m (17 ± 2 ft-lb)
	Roll stopper bracket	69 ± 10 N.m (51 ± 7 ft-lb)
	Speedometer gear	5 ± 1 N.m (43 ± 9 in-lb)
	Torque converter housing	48 ± 6 N.m (35 ± 4 ft-lb)
	Transfer drive gear	34 ± 2 N.m (25 ± 1 ft-lb)
	Valve body cover	11 ± 1 N.m (95 ± 9 in-lb)
	Valve body mounting bolt	11 ± 1 N.m (95 ± 9 in-lb)
	Wiring harness bracket	23 ± 3 N.m (17 ± 2 ft-lb)
Components	Differential drive gear	132 ± 5 N.m (98 ± 4 ft-lb)
	Plate	6 ± 1 N.m (52 ± 9 in-lb)
	Solenoid valve support	6 ± 1 N.m (52 ± 9 in-lb)
	Valve body	11 ± 1 N.m (95 ± 9 in-lb)