LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2000 >> Montero >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - V4AW3 >> Component Tests >> Output Speed Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Output Speed Sensor

Disconnect solenoid and sensor harness connector. Using ohmmeter, measure resistance between sensor terminals No. 3 and 4. See Figure . Resistance should be 560-680 ohms at 68°F (20°C). If resistance is not as specified, replace output speed sensor.

scientia non olet · About LEMON Manuals