LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1997 >> Galant ES >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2007 GALANT 2.4L, Outlander >> Pattern 20 >> Test Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Lets the engine idle for 10 minutes. (During the monitor)
  3. Turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals