LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1997 >> Eclipse Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Door Locks - Power & Keyless Entry >> Transmitter Programming
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transmitter Programming

NOTE: Transmitter programming should be performed only after verifying that door lock operates normally using key.
NOTE: Ensure ignition is off when connecting or disconnecting scan tool.
  1. Connect Scan Tool (MB991502) to DLC. Close all doors. Turn ignition to ACC position then to OFF position. Press desired transmitter switches (secret code), then press twice within 10 seconds and code will be registered.
  2. Lock and unlock door once. If there are 2 transmitters, program the first, then the second using the same procedure within one minute. After completing the second programming, lock and unlock door once.
  3. Programming mode is finalized when programming of 2 transmitter secret code is complete, one minute after setting secret code, when scan tool is disconnected, when ignition is turned on or when any door is opened.
scientia non olet · About LEMON Manuals