LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Galant LS >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Electronic Power >> Self-Diagnostic System >> Retrieving Codes >> Using Scan Tester
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Using Scan Tester

  1. Refer to manufacturer's operation manual for instructions in use of scan tester. Before entering on-board diagnostics, see SERVICE PRECAUTIONS  . Turn ignition switch to OFF position. Locate both Data Link Connectors (DLC), next to center console. See Figure .
  2. Connect scan tester to DLC. Turn ignition switch to ON position. Read and record scan tester self-diagnostic output. Perform necessary repair(s). See TROUBLE CODES  .
scientia non olet · About LEMON Manuals