LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Galant ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> DISTRIBUTORLESS Ignition System (Dis) >> Ignition Coil Resistance
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition Coil Resistance

  1. Disconnect ignition coil connector. Using a Digital Volt-Ohmmeter (DVOM), measure primary coil resistance between ignition coil connector terminals No. 2 and 3 (coils for cylinders No. 1 and 4) and terminals No. 1 and 3 (coils for cylinders No. 2 and 3). See Fig 1 .
  2. Remove ignition wires from coil. Measure secondary coil resistance between coil towers for cylinders No. 1 and 4 and between coil towers for cylinders No. 2 and 3. Primary and secondary coil resistance should be within specification. See IGNITION COIL RESISTANCE  table. Connect coil harness connector. Connect ignition wires to coil.
    IGNITION COIL RESISTANCE - DIS (1)

    Application Primary Secondary
    DOHC .67-.81 11,310-15,300
    (1) Ohms @ 68°F (20°C)
    Fig 1: Identifying Ignition Coil Connector (DIS)
    G93A78154Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals