September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Ignition Coil Resistance
- Measure primary coil resistance between terminal No. 3 (power terminal) and each individual coil terminal using a DVOM. See Fig 1
. To check secondary coil resistance, measure resistance between towers of each individual coil.
- Replace coil if primary and secondary coil resistances are not within specification. See IGNITION COIL RESISTANCE
table.
IGNITION COIL RESISTANCE - DIS
| Application |
Primary |
Secondary |
| 3.0L |
.67-.81 |
11,300-15,300 |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.