Idle Speed & Ignition Timing

Ensure vehicle is at operating temperature, all accessories are off and transmission is in Park or Neutral. Vehicle front wheels must be in straight-ahead position and curb idle speed set to specification. If vehicle is equipped with a dual diaphragm distributor, go to next step. If vehicle is equipped with an ignition timing adjustment connector, go to step 3).
Disconnect vacuum hose farthest from distributor. Plug vacuum hose. Check ignition basic timing. Connect vacuum hose to distributor. Check ignition actual timing. Refer to IGNITION TIMING table in this article.
Ground ignition timing adjustment connector. Timing adjustment connector is a Yellow/Red wire at left of center, on firewall. Check ignition basic timing.

Disconnect ground wire on ignition timing adjustment connector. Check ignition actual timing. Refer to IGNITION TIMING table.

IDLE SPEED & CO LEVEL SPECIFICATIONS ⁽¹⁾

Application

Idle RPM

CO %

Montero (2.6L)

700-900

.1-.3

⁽¹⁾	Idle speed and mixture are computer controlled on fuel injected models.

IGNITION TIMING (Degrees BTDC @ RPM)

Application

⁽¹⁾ Basic

⁽²⁾⁽³⁾ Actual

1.5L

Mirage

5 @ 600-800

10 @ 600-800

Precis

5 @ 600-800

10 @ 600-800

1.6L

Mirage

5 @ 650-850

8 @ 650-850

1.8L

Eclipse

5 @ 600-800

10 @ 600-800

2.0L

Eclipse & Galant (VIN R)

5 @ 650-850

8 @ 650-850

Galant (VIN V)

5 @ 650-850

10 @ 650-850

2.4L

Pickup & Van/Wagon

5 @ 650-850

8 @ 650-850

2.6L

Montero

7 @ 750-950

12 @ 750-950

3.0L

Montero & Sigma

5 @ 600-800

15 @ 600-800

Pickup

8 @ 600-800

15 @ 600-800

⁽¹⁾	With ignition timing adjustment connector grounded or vacuum hose (farthest from distributor) disconnected.

⁽²⁾	With ignition timing adjustment connector ungrounded or vacuum hose (farthest from distributor) connected. Ignition timing may fluctuate.

⁽³⁾	If vehicle altitude is more than 2300 ft. above sea level, actual timing may be advanced.