LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1987 >> Van Base, Van Cargo >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - MITSUBISHI MPI >> Testing >> Throttle Position Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Throttle Position Sensor

  1. Turn ignition switch to "OFF" position. Disconnect Throttle Position Sensor (TPS) connector. Check resistance across terminals No. 1 and 2. Total resistance should measure 3.5 to 6.5 ohms.
  2. Attach circuit tester to terminal No. 3 and terminals No. 1 and 2 individually. See Figure . As the throttle valve is slowly operated from closed to wide open throttle, watch meter. Ohmmeter should show a smooth transition of resistance value.