LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1983 >> Starion LS >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Evaporation System >> Component Testing >> Purge Control Valve >> All Other Models
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

All Other Models

Start and run engine until coolant temperature is 180°-190°F (82°-88°C). Stop engine. Remove purge hose from air cleaner and blow air into it. No air should pass through purge valve. Start engine and hold at 2000 RPM. Air should pass freely through purge valve. Replace valve if it does not respond as specified.

scientia non olet · About LEMON Manuals