Engine Electrical System - Repair -- Cooper (F54)
- 12 00 Engine electrical system
- 12 12 Ignition wire, spark plugs
- 12 13 Ignition coil
- 12 14 Electronic switching or control units
- Replacing crankshaft pulse sensor (B36, B38, B46, B48) (Cooper)
- Replacing pulse sensor on intake camshaft (B36, B38) (Cooper)
- Replace pulse sensor on exhaust camshaft (B36, B38) (Cooper)
- Replacing control unit (DME) (Cooper)
- Replacing the knock sensor (B36, B38) (Cooper)
- Programming the control unit (DME/DDE) (Cooper)
- Replacing pulse sensor on intake camshaft (B48, B46) (Cooper S)
- Replace pulse sensor on exhaust camshaft (B48, B46) (Cooper S)
- Replacing the knock sensor (cylinder 1. and 2.) (B48, B46) (Cooper S)
- Replacing knock sensor (cylinder 3. and 4.) (B48, B46) (Cooper S)
- 12 31 Alternator with drive and attachment
- 12 41 Starter with attachment
- 12 42 Starter line
- 12 51 Engine wiring harness
- Replacing the wiring harness section for injectors and ignition coils (B36, B38, B46, B48) (Cooper)
- Replacing the wiring harness section for the Valvetronic servomotor (B36, B38, B46, B48) (Cooper)
- Replacing the wiring harness section for engine sensor system module 1 (B36, B38, B48, B46) (Cooper)
- Replacing the wiring harness section for engine sensor system module 2 (B36, B38, B46, B48) (Cooper)
- Removing and installing the wiring harness section for the supply module (B36, B38, B48, B46) (Cooper)
- 12 61 Oil pressure, oil temp, oil level check
- 12 63 Switch and relay