86 10... Disassembly of rear apron

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Remove rear light,
REFER TO 86 10... REPLACING REAR LIGHT.
Remove plastic bush/metal bush
REFER TO 86 10... REMOVING PLASTIC BUSH/METAL BUSH.

Cut through sealing compound (1) on left and right and remove.

Drill out rivets (2) on left and right sides on lower apron edge.

Installation

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Lower Apron Sealing Compound And Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Cut through sealing compound (1) and remove.

Drill out rivets (2).

Installation

Use Sikaflex 221 as sealing compound.

Fig 2: Identifying Lower Apron Sealing Compound And Rivets

Courtesy of BMW OF NORTH AMERICA, INC.