86 10... Disassembly of front protection bar

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) on cross-member (2).

Installation:

Use new self-locking nuts.

Tightening Torque,

Refer to TIGHTENING TORQUE 86 10 4AZ.

Installation

Tightening Torque,

Refer to TIGHTENING TORQUE 86 10 5AZ.

Fig 1: Identifying Front Protection Bar Cross Member With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on longitudinal member (2).

Installation

Tightening Torque,

Refer to TIGHTENING TORQUE 86 10 5AZ.

Fig 2: Identifying Front Protection Bar Longitudinal Member With Screws

Courtesy of BMW OF NORTH AMERICA, INC.