00 .. ... Symbols Used And Information In Repair Instructions

WARNING: This page is about a different car, the 2008 BMW Alpina, 2008 BMW 750i, 2007 BMW Alpina, 2007 BMW 750i, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Precautionary rules and measures which protect mechanics and other personnel against injury (including life-threatening injuries).

Example:

WARNING: Danger of scalding!
Only perform this work after engine has cooled down.

IMPORTANT: Specific instructions and precautionary measures which prevent damage to the vehicle or to vehicle parts. Failure to comply with the above will invalidate any warranty claims.
The caution symbol is used in all repair instructions.
However, use of the warning word "Caution!" is not binding in every case.
The notes, instructions and precautionary measures mentioned above retain their validity.

NOTE: Particular information on improved procedures for operation, testing, adjustment and upkeep.
Also indicates the end of a repair section.

Recycling:

Observe country-specific waste-disposal regulations

General information:

Refers to other instructions: such as e.g.:

Necessary preliminary tasks;

Further instructions: refer to operating instructions for balancing machine.

Replacement:

Carry out programming/coding.

NOTE: Many electronic control units must be programmed/coded (e.g. when replaced).

NOTE:

Connect BMW diagnosis system

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).

NOTE: Electronic control units and other electronic components - if handled incorrectly - can be damaged or destroyed by electrostatic discharge.