LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2011 >> Cooper Works, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Suspension - Front) >> Removal & Installation >> Control Arm >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Arm: Installation

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install new control arm. Ensure ball pin and bore are free of grease. Replace self-locking nuts. If necessary, grip at Torx socket and tighten to specification. See TORQUE SPECIFICATIONS  .
  2. Perform front axle alignment check. See WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals