Replacement Of Instrument Cluster Fails Coding (M09 07 06)
WARNING: This page is about the Cooper Base, Automatic CVT, which is a different variant/trim than selected.
Publication date: 2006-11-16Reference number: M09 07 06
REPLACEMENT OF INSTRUMENT CLUSTER FAILS CODING
TECHNICAL SERVICE BULLETIN
Reference Number(s): SI M09 07 06, Date of Issue:
November 16, 2006
| MINI: | R50 (Cooper), R52 (Convertible), R53 (Cooper S) |
| GROUP: | Programming/Coding Explanation |
SUBJECT
Replacement of Instrument Cluster Fails Coding
SITUATION
The Instrument Cluster could not be coded after replacement. Writing of the ZCS with Progman fails.
CAUSE
Replacement parts have a wrong default ZCS code format which cannot be determined by Progman.
PROCEDURE
The failure will be fixed in a future Progman version.
Until further notice, order a pre coded Instrument Cluster.