Wiper Stalk Switch
CODED GROUND SIGNALS FROM WIPER SWITCH
| Switch Position | SW1 | SW2 |
|---|---|---|
| Single Wipe | 1 | 1 |
| Off (Park) | 0 | 0 |
| Intermittent | 1 | 0 |
| Slow (Speed 1) | 0 | 1 |
| Fast (Speed 2) | 1 | 1 |
Coded ground signals are input to the BC1 from the Wiper Stalk Switch to accommodate wiper functions. Switched grounds are also provided to request washer (front or rear) and rear wiper activation.
1 = Switch Active (Ground)
0 = Open Circuit