LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Automatic Transmission - CVT) >> General Procedures >> Transaxle Support Insulator >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transaxle Support Insulator: Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the rear transaxle mount bolts using a wire brush and apply new Threadlocker to the threads.
  2. Position the transaxle mount in place and install the upper bolts.
    • Tighten to 55 N.m (41 lb-ft).
    Fig 1: Locating Upper Transaxle Mount Bolts (2 Of 2)
    G04656284Courtesy of FORD MOTOR CO.
  3. Install the rear transaxle mount. Install the bolts.
    • Tighten to 90 N.m (66 lb-ft).
    Fig 2: Locating Rear Transaxle Mount Bolts
    G04656285Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals