LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1488 (Seat System - Seats) >> Removal And Installation >> Memory Set Switch >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the memory SET switch bezel tab at the top and separate from the door panel.
    Fig 1: Locating Memory SET Switch Bezel Tab
    G06259507Courtesy of FORD MOTOR CO.
  2. Disconnect the electrical connector, release the 4 tabs and remove the memory SET switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals