LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2006 >> Milan Base, 2.3 Z, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control >> Removal And Installation >> Accelerator Pedal and Bracket >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Remove the 2 nuts and the accelerator pedal and bracket.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals