LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2005 >> Sable Platinum Edition >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Connecting Rod Bend
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Connecting Rod Bend

  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    • Refer to the appropriate ENGINE MECHANICAL article for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate ENGINE MECHANICAL article for the procedure.
    Fig 1: Measuring Connecting Rod Bend
    G03885036Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals