LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2004 >> Marauder >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules System >> Removal And Installation >> Module - Lighting Control (LCM) >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the LH instrument panel lower insulator.
    1. Remove the pin-type retainers.
    2. Disconnect the courtesy lamp.
    Fig 1: Removing LH Instrument Panel Lower Insulator
    G02755700Courtesy of FORD MOTOR CO.
  3. If equipped with adjustable pedals, remove the accelerator pedal, and shaft. For additional information, refer to ACCELERATION CONTROL .
  4. Position the LCM aside.
    1. Remove the screws.
    2. Release the locking tab.
    Fig 2: Removing LCM
    G02755701Courtesy of FORD MOTOR CO.
  5. Disconnect the electrical connectors and remove the LCM.
    Fig 3: Removing Lighting Control Module
    G02755702Courtesy of FORD MOTOR CO.
  6. To install, reverse the removal procedure.
    • Check for correct operation.