Removal & Installation
WARNING: This page is about a different car, the 2003 Mercury Mountaineer and 2003 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Remove fuel tank. See FUEL TANK . Disconnect quick connect fittings at fuel pump module. Remove lock ring using Special Tool (310-075). Remove fuel pump module. See Fig 2. Wipe seal area of tank clean. Position NEW seal onto fuel pump module mounting flange using grease, if necessary to hold it in position. Position fuel pump in tank to original position. Install lock ring. DO NOT overtighten lock ring, as it may leak. Install fuel tank. See FUEL TANK . Tighten fasteners to specification. See TORQUE SPECIFICATIONS .