LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Exterior Lighting System) >> Removal And Installation >> Ballast >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headlamp assembly. For additional information, refer to HEADLAMP ASSEMBLY  in this service information.
  2. Remove the 4 screws and the ballast.
    • Disconnect the electrical connectors.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals