LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2000 >> Cougar 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Anti-Lock Brake Control System) >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Hydraulic Control Unit (HCU): Installation

WARNING: This page is about a different car, the 2003 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: After installation, bleed the brake system. For additional information, refer to BLEEDING BRAKE SYSTEM .
    Fig 1: Identifying Hydraulic Control Unit
    G01610774Courtesy of FORD MOTOR CO.
    Fig 2: Installing Master Cylinder Brake Tubes
    G01610775Courtesy of FORD MOTOR CO.
    Fig 3: Installing Hydraulic Control Unit Brake Tubes
    G01610776Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
Fig 4: Identifying Bolt
G01610777Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals