October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

AX4S

Removal
1. Raise and suitably support vehicle.
2. Remove dual converter Y-pipe from exhaust system.
3. Remove heat shield from transaxle.
4. Disconnect Vehicle Speed Sensor (VSS) electrical connector.
5. Remove VSS retaining bolt and remove VSS from transaxle.

Installation
1. Follow removal procedure in reverse order.

2. Tighten VSS retaining bolt to 5-8 Nm (45-70 inch lbs.).