October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

AX4N

Removal
1. Raise and suitably support vehicle.
2. Remove dual converter Y-pipe from exhaust system.
3. Disconnect vehicle speed sensor electrical connector.
4. Remove VSS shield from VSS.
5. Remove VSS retaining bolt and VSS from transaxle.
6. Remove retainer clip and speedometer gear from VSS.

Installation
1. Follow removal procedure in reverse order.

2. Tighten VSS retaining bolt to 4-6 Nm (36-53 inch lbs.)