LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1995 >> Tracer Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.9L >> Fuel System >> Fuel Line Connector >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Line Connector: Removal

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE. Disconnect negative battery cable. Depress 2 clips securing front of rear seat cushion, and remove seat cushion. Disconnect wiring harness connectors from fuel pump assembly.
  2. Remove fuel pump access cover. Remove any dirt from around fuel pump flange area. Disconnect fuel inlet and return lines from fuel pump. Remove fuel pump screws, and remove fuel pump/sender assembly.
scientia non olet · About LEMON Manuals