LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 1983 >> Capri Base, Standard, RAP >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Ignition System - DURA-Spark II >> Testing >> Module-To-Coil Wire Check
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Module-To-Coil Wire Check

  1. Disconnect control module 4-wire connector and ignition coil connector. Connect one ohmmeter lead to distributor base and the other to "TACH" terminal of ignition coil connector. Measure resistance and reconnect all connectors.
  2. If resistance is greater than 1 ohm, replace control module. If resistance is 1 ohm or less, inspect wiring harness between control module and ignition coil.
scientia non olet · About LEMON Manuals