LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2025 >> Sprinter 3500XD Van Cargo Extended, 4WD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 3085 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control (Pcm) >> Removal And Installation >> 2.0L Diesel >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.0L Diesel: Installation

WARNING: This page is about a different car, the 2018 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the PCM and securely tighten the nuts.
  2. Connect the wire harness connectors to the PCM.
  3. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATIONCOVER, ENGINE, REMOVAL AND INSTALLATION .
NOTE:

If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to determine if alignment of the PROXI configuration data into the new ECU is needed. If PROXI alignment is needed, follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under the Body Control Module (BCM) Miscellaneous Functions menu.

scientia non olet · About LEMON Manuals