Remove/Install Pressure Transducer For Boost Pressure Aneroid Capsule - Ar09.40-D-1003TSR

Engine 651 in model 907 

	Remove/install
1	Remove exhaust gas recirculation line downstream of exhaust gas recirculation valve		AR14.20-D-1063TSR
2	Remove hoses (3)	Mark arrangement of hoses (3). Note assignment of hoses (3 to connections at pressure transducer (1). Check hoses (3) for damage. Depending on findings ↓ Replace damaged hose (3).
3	Disconnect electrical connection (2)
4	Loosen bolt (5)	M6	*BA00.10-N-1002-01A
5	Remove screw (4)	M6	*BA00.10-N-1002-01A
6	Remove pressure transducer (1)
7	Install in the reverse order
	Check
	Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
8	Check for leak tightness with engine running	Visual inspection only.

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			8.8	10.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	9	13
		Phosphated	Nm	9	12

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			12.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	16
		Phosphated	Nm	14