Mount High-Pressure Lines. - Ar07.03-S-1010-02EG
| Notes on threaded connections fastened using a tightening angle-based tightening process |
AH00.00-P-0020-01A |
| Note on calculation of tightening torque when using insertion or socket tools with various effective lengths |
AH00.00-P-0015-01CW |
Model 907 with engine 274
INJECTION NOZZLES, INJECTION VALVES, LINES
| Number |
Designation |
Engine 274 in model 907 |
| BA07.03-N-1002-01H |
Union nut, high-pressure line to rail |
Stage 1 |
Nm |
15 |
| Stage 2 |
∠ ° |
75 |
| Stage 3 |
∠ ° |
25 |
INJECTION NOZZLES, INJECTION VALVES, LINES
| Number |
Designation |
Engine 274 in model 907 |
| BA07.03-N-1003-01H |
Union nut, high-pressure line to high pressure pump |
Stage 1 |
Nm |
15 |
| Stage 2 |
∠ ° |
75 |
| Stage 3 |
∠ ° |
25 |
- Attach high-pressure line (1) to high-pressure pump (2) and rail (3).
Tighten union nuts of the high-pressure line (1) slightly by hand.
- Tighten down union nuts for high-pressure line (1)
.
Shown on model 447 with engine 274