Retrofit Cruise Control - An30.30-D-0002TS

Model 907 

with code C6L (Multifunction steering wheel) 

with code MJ8 (ECO start/stop function) 

except code ZU7 (National version for Canada) 

except code ZU8 (National version for USA) 

Shown with TEMPOMAT 

	Remove
1	Remove left button group (1) on steering wheel.
	Removed button group (1) is no longer required and must be handed over to the customer or properly disposed of after consultation with the customer.		AR54.25-D-2841TS
2	Remove accelerator pedal.
	Removed accelerator pedal is no longer required and must be handed over to the customer or properly disposed of after consultation with the customer.		AR30.20-D-2000TS
	Install
3	Install new accelerator pedal.
	Use accelerator pedal from parts kit.		AR30.20-D-2000TS
4	Retrofit button group (1) with TEMPOMAT.
	Use button group (1) from parts kit.		AR54.25-D-2841TS
5	Enter special equipment into online vehicle data card.	Designation of the respective special equipment: code MS1 (CC). Attach note "TEMPOMAT retrofitted as per " under field organization texts in KG54 and KG30.	AN30.30-D-0002TS
6	Carry out SCN coding on electronic ignition lock control unit (EZS).
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". Do not yet remove vehicle diagnosis system.		AR54.21-D-0015TS
7	Perform SCN coding on Common Powertrain Controller (CPC) control unit.
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". Do not yet remove vehicle diagnosis system.		AR54.21-D-0015TS
8	Carry out SCN coding on instrument cluster (IC) control unit.
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". Do not yet remove vehicle diagnosis system.		AR54.21-D-0015TS
9	Perform SCN coding on head unit control unit.	Model 907,with code E1A (MBCONNECT-5) or code E1C (Audio 25) or code EJ2 (Audio 20) or code EJ9 (COMAND Online)
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding".		AR54.21-D-0015TS
	Check
10	Perform function test of TEMPOMAT during test drive.