Retrofit Cruise Control - An30.30-D-0002TSB

Model 907 

with code C6L (Multifunction steering wheel) 

with code ZU7 (National version for Canada) 

Model 907 

with code C6L (Multifunction steering wheel) 

with code ZU8 (National version for USA) 

Shown with TEMPOMAT 

	Remove
1	Remove left button group (1) from steering wheel.
	Removed button group (1) is no longer required and is to be handed over to the customer or disposed of properly after consultation with the customer.		AR54.25-D-2841TS
	Install
2	Retrofit button group (1) with TEMPOMAT.
	Use button group (1) from parts kit.		AR54.25-D-2841TS
3	Enter special equipment into online vehicle data card.	Designation of the respective special equipment: code MS1 (CC). Attach note "TEMPOMAT as per retrofitted" under the field organization texts to KG54 and KG30.	AN30.30 D-0002TSB
4	Carry out SCN coding on electronic ignition lock control unit (EZS).
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". Do not yet remove vehicle diagnosis system.		AR54.21-D-0015TS
5	Perform SCN coding on Common Powertrain Controller (CPC) control unit.
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". Do not yet remove vehicle diagnosis system.		AR54.21-D-0015TS
6	Carry out SCN coding on instrument cluster (IC) control unit.
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". Do not yet remove vehicle diagnosis system.		AR54.21-D-0015TS
7	Perform SCN coding on head unit control unit	Model 907 with code E1A (MBCONNECT-5) or code E1C (Audio 25) or code EJ2 (Audio 20) or code EJ9 (COMAND Online)
	Under the "Control unit adaptations" menu item follow the instructions for "SCN coding".		AR54.21-D-0015TS
	Check
8	Perform TEMPOMAT function test during test drive.