Remove/Install Boost Pressure Sensor Downstream Of Throttle Valve - Ar09.41-D-0004TSV

Engine 642 in model 907 

	Remove/install
1	Remove mixer housing.		AR09.20-D-1320TSV
2	Remove boost pressure sensor (1).	Unscrew screw/bolt (2) to do this. : Check sealing ring for damage.
		Bolt, boost pressure sensor to mixer housing Depending on the findings, ↓ Replace sealing ring.	*BA09.41-N-1011-01O
3	Install in the reverse order.

CHARGE AIR PIPE, CHARGE AIR COOLING, MIXER HOUSING

Number	Designation		Engine 642
BA09.41-N-1011-01O	Bolt, boost pressure sensor to mixer housing	Nm	6