Remove/Install Air Intake Pipe - Ar09.10-D-8131TS

Engine 651 in model 907 

MODIFICATION NOTES

08.07.2019	BA09.10-N-1002-01TS added.	Operation step 1
08.07.2019	BA09.10-N-1004-01TS added	Operation step 6

	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on avoiding damage through contamination and foreign objects	Omnibus	AH00.00-N-5000-01H
	Notes on avoiding damage through contamination and foreign objects	Leichte Transporter	AH00.00-P-5000-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Release clip (6).	Check clamp (6) for damage.
		Clamp, air intake pipe to hot film mass air flow sensor Depending on the findings, 1 Replace damaged clamp (6).	*BA09.10-N-1002-01TS
2	Disconnect electrical connectors (2).
3	Remove electrical wiring harness (3) from air intake pipe (1).	Replace required cable ties.
4	Remove air intake pipe (1) from hot film mass air flow sensor (7).
5	Remove hose (4) from air intake pipe (1).
6	Release clamp (5).	Check the clamp (5) for damage.	*BA09.10-N-1004-01TS
		Clamp, air intake pipe to turbocharger Depending on the findings, 1 Replace the damaged clamp (5).	*BA09.10-N-1004-01TS
7	Remove air intake pipe (1).	: Check seals. Depending on the findings, ↓ Replace seals.
8	Install in the reverse order.
	Check
	Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
9	Check for leaktightness when engine is running.	Visual inspection only.

AIR FILTER

Number	Designation		Engine 651 in model 907
BA09.10-N-1002-01TS	Clamp, air intake pipe to hot film mass air flow sensor	Nm	4

AIR FILTER

Number	Designation		Engine 651 in model 907
BA09.10-N-1004-01TS	Clamp, air intake pipe to turbocharger	Nm	4