LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2022 >> Sprinter 2500 Van Cargo, 2.1L Eng >> Repair and Diagnosis >> External Pages >> Different car >> Section 3190 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal And Installation >> Emergency Assistance Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Emergency Assistance Module: Installation

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the EAM to the EAM mounting bracket.
  2. Install and tighten the four screws for the EAM. Tighten the screws securely.
  3. Connect the instrument panel wiring harness connectors.
  4. Install the ICS. Refer to CONTROLS, REAR CABIN COMFORT (RCCC)., REMOVAL AND INSTALLATION MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals