| |
Notes on avoiding damage through contamination and foreign objects |
|
AH00.00-P-5000-01A |
  |
Remove/install |
|
|
| 1 |
Remove exhaust gas recirculation cooler |
|
AR14.20-D-7665TSR |
| 2 |
Remove exhaust gas recirculation line downstream of exhaust gas recirculation valve |
|
AR14.20-D-1063TSR |
| 3 |
Remove valve (4) |
|
|
| 4 |
Unclip filter (5) from bracket (6) |
|
|
| 5 |
Remove screw/bolts (2) |
Bolt, charge air line to charge-air distributor |
*BA09.41-N-1005-01TSR |
| 6 |
Remove bolts (7) |
Bolt, charge air line to mounting plate |
*BA09.41-N-1003-01TSR |
| 7 |
Disconnect electrical connector (3) |
|
|
| 8 |
Remove electrical wiring harness (8) from charge air line (1) |
|
|
| 9 |
Unscrew screw/bolts (9) |
: Observe tightening procedure of screw/bolts (9). |
AR09.41-D-1330-01TSR |
|
Bolt, charge air line with throttle valve actuator to charge air pipe |
*BA09.41-N-1004-01TSR |
| 10 |
Remove charge air line (1) |
: Replace seals. |
|
| 11 |
Install in the reverse order |
|
|
 |
Check |
|
|
 |
Risk of accident
from vehicle starting off by itself when engine running. Risk of injury
(bruises and burns) resulting from working on the engine while it is being started or when it is running. |
Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A |
| 12 |
Perform engine test run and check charge air system in area of charge air line (1) for leaks |
Visual inspection only. |
|