Remove/Install All-Wheel Drive Control Unit - Ar28.19-D-0009TSX
Model 907
with code ZG1 (Engageable all-wheel drive)
Model 907
with code ZG3 (Engageable all-wheel drive with gear reduction)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S | ||
| Remove/install | |||
| 1.1 | Remove driver seat. | Model 907 except code SR8 (Driver's seat bogie) | AR91.10-D-1000TS |
| 1.2 | Remove turn plate with installed driver's seat. | Model 907 with code SR8 (Driver's seat bogie) |
AR91.10-D-1456TS |
| 2 | Remove cover (2). | ||
| 3 | Detach control unit (1) from bracket (3). | ||
| 4 | Remove control unit (1). | ||
| 5 | Install in the reverse order. | ||
| 6 | Teach-in control unit (1) using vehicle diagnosis system. | If control unit (1) was replaced. | |
| Connect/disconnect diagnostic unit | AD00.00-D-2000-06TS |