LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2022 >> Sprinter 2500 Van Cargo Extended, 2.1L Eng >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Other Variant >> System >> Fault Code P06DA00 Current Or Stored In Engine Control Unit (LI07.70-P-070763)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fault Code P06DA00 Current Or Stored In Engine Control Unit (LI07.70-P-070763)

WARNING: This page is about the Sprinter 2500 Van Cargo, 2.0L Eng, which is a different variant/trim than selected.
Publication date: 2023-11-17
Reference number: LI07.70-P-070763

FAULT CODE P06DA00 CURRENT OR STORED IN ENGINE CONTROL UNIT

FAULT CODE P06DA00 CURRENT OR STORED IN ENGINE CONTROL UNIT

TECHNICAL SERVICE BULLETIN

Reference Number(s): LI07.70-P-070763 Version 3, Date of Issue:  November 17, 2023
MERCEDES-BENZ: Passenger cars with engines M270 or M274
FUNCTION GROUP: 07.70 - Gasoline injection and ignition system direct injection
REASON FOR CHANGE: Remedy modified

COMPLAINT

Fault code P06DA00 is found current or stored in engine control unit. Check engine light may be activated.

CAUSE

Various causes

REMEDY

Up to Model year 2018 

Fault code P06DA00 can be disregarded if not activating the check engine light  , unless otherwise specified in the guided test. The vehicle continues to operate as designed. Further causes should be investigated if complaint of check engine light is received.

If fault code P06DA00 is activating the check engine light  , update software of the ME control unit. No further repairs needed if the code no longer activates check engine light after 2 drive cycles.

Model year 2019 and later 

Fault code P06DA00 will activate check engine light as of model year 2019. No driveability concerns will be observed, only illumination of the CEL.

This fault code indicates high resistance or open in the circuit to Y130 oil pump control valve.

Perform guided test for component Y130 under list of tests in ME. Diagnose location of high resistance or open in Y130 circuit and repair as necessary.

Warranty claims submitted without supporting guided test results may be subject to debit.

SYMPTOMS

SYMPTOMS

Power generation > Engine management > Indicator lamp > Engine diagnosis > lit
Power generation > Engine management > Function > Malfunction

CONTROL UNIT/FAULT CODE

CONTROL UNIT/FAULT CODE

Control unit Fault text
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.
N3/10 - Motor electronics 'MED40' for combustion engine 'M274' (ME) (MED40) P06DA00 - The actuation of the valve of the oil pump in the combustion engine has an electrical fault or open circuit.

OPERATION NUMBERS/DAMAGE CODES

OPERATION NUMBERS/DAMAGE CODES

Op. no. Operation text Time Damage code Note